-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
MSOS804A oscilloscope bandwidth: 8GHz, 4 analog channels, 16 digital channels
Core performance indicators Bandwidth: 8 GHz. Number of channels: 4 analog channels, supporting simultaneous measurement of multiple signals. Sampling rate: Up to 20 GSa/s in dual-channel mode and 10 GSa/s in quad-channel mode. Storage depth: Standard 50 Mpts per channel
Category:
Digital oscilloscope
Product Attachment:
- Product Description
- Selection
-
- Commodity name: MSOS804A oscilloscope bandwidth: 8GHz, 4 analog channels, 16 digital channels
Core performance indicators Bandwidth: 8 GHz. Number of channels: 4 analog channels, supporting simultaneous measurement of multiple signals. Sampling rate: Up to 20 GSa/s in dual-channel mode and 10 GSa/s in quad-channel mode. Storage depth: Standard 50 Mpts per channel
Core Performance Indicators
Bandwidth: 8 GHz
Number of Channels: 4 analog channels, supporting simultaneous measurement of multiple signals.
Sampling Rate: Up to 20 GSa/s in dual-channel mode, 10 GSa/s in quad-channel mode.
Memory Depth:
Standard 5 Mpts per channel (100 Mpts available with some configurations or upgrades).
Signal Integrity and Resolution
Vertical Resolution:
Standard 10-bit ADC, effective number of bits (ENOB) is 8.1 bits (at full bandwidth).
In high-resolution mode, it can be upgraded to 16 bits through advanced architecture (requires software or hardware support).
Noise Performance: Noise as low as 90 μV at 1 GHz bandwidth, supporting precise measurement of small signals.
Display and Interaction
Display: 15-inch XGA capacitive touchscreen, supporting multi-touch operation, facilitating waveform scaling, panning, and parameter adjustment.
Storage and Startup: Standard solid-state drive (SSD) for fast startup (approximately within 30 seconds) and data storage.
Interfaces and Expandability
Communication Interfaces: USB 3.0 (multiple ports), Ethernet (10/100/1000 Base-T), DisplayPort and VGA output, supporting remote control and data transmission.
Probe Support: Standard 4 N2873A 500 MHz passive probes, compatible with various active probes and current probes.
Functions and Software
Trigger System: Supports various trigger modes such as edge, pulse width, slope, and video, allowing flexible capture of complex signals.
Analysis Tools: Built-in more than 50 automatic measurements, mathematical functions (such as FFT), protocol decoding (requires optional accessories), and jitter analysis functions.
Software Compatibility: Supports Keysight PathWave series software, enabling advanced applications such as eye diagram analysis and compliance testing.
Physical Characteristics
Dimensions and Weight: Approximately 19.8 cm (H) × 48.3 cm (W) × 49.8 cm (D), weight approximately 12.7 kg (excluding probes).
Power Supply: Supports 100-240 V AC wide voltage input, power consumption approximately 250 W.
Certification and Compliance
Complies with China Compulsory Certification (CCC) requirements, suitable for the mainland China market.
Applicable Scenarios
High-speed digital circuit testing: such as PCIe, USB, DDR bus signal integrity analysis.
Analog signal measurement: precise voltage and current waveform capture in low-noise environments.
Mixed-signal debugging: combined with logic analysis function (requires optional MSO model)
Previous Page
Previous Page
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us