-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
DisplayPort 2.1 finished product line test system
To meet the rapid development of DisplayPort 2.1 cable products, a fully automated measurement solution that meets market demand has been officially launched. Sentec Electronics has developed a DisplayPort 2.1 fully automated test system (4 pairs of 24 ports). This system features low labor costs and high flexibility. Coupled with the user-friendly system software developed by Sentec, it helps cable manufacturers quickly complete quality confirmation and meet the needs of high-frequency measurement of mass-produced cables. The DisplayPort 2.1 fully automated test system supports: RBR, HBR2, HBR3, DP8K HBR3, DP8K UHBR10, DP40 UHBR10, DP80 UHBR13.5, DP80 UHBR20 protocols.
Category:
High-frequency measurement system services
Product Attachment:
- Product Description
- Selection
-
- Commodity name: DisplayPort 2.1 finished product line test system
To meet the rapid development of DisplayPort 2.1 cable products, a fully automated measurement solution that meets market demand has been officially launched. Sentec Electronics has developed a DisplayPort 2.1 fully automated test system (4 pairs of 24 ports). This system features low labor costs and high flexibility. Coupled with the user-friendly system software developed by Sentec, it helps cable manufacturers quickly complete quality confirmation and meet the needs of high-frequency measurement of mass-produced cables. The DisplayPort 2.1 fully automated test system supports: RBR, HBR2, HBR3, DP8K HBR3, DP8K UHBR10, DP40 UHBR10, DP80 UHBR13.5, DP80 UHBR20 protocols.
DisplayPort 2.1 Fully Automatic Test System
Test Parameters
Measurement parameters vary depending on the type of test cable purchased
Supported Measurement Parameters Frequency-Domain Parameters (S-Parameter):
Attenuation/Insertion Loss (Sdd21/ Sdd12)
Return Loss (Sdd11/ Sdd22)
Differential to Common Mode Conversion (Scd21/Sdc21)
Delay
Skew
Other S-Parameters
Time-Domain Parameters
Impedance
Delay
Inter-Pair Skew
Intra-Pair Skew
Rise Time
Eye Diagram Parameters
Eye Pattern
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us