-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
N9048B PXE EMI test receiver, 1 Hz to 26.5 GHz
Category:
EMI test receiver
Authentication level
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N9048B PXE EMI test receiver, 1 Hz to 26.5 GHz
- Brand: Keysight Technologies
In-depth Analysis of the Keysight N9048B PXE EMI Receiver: A Revolutionary Tool for 5G and Automotive Electronics Testing
I. Product Positioning and Core Value
II. Core Technical Indicators and Performance Breakthroughs
- Basic Frequency Range : 2 Hz to 26.5 GHz (supports expansion to 44 GHz via option)
- Real-time Bandwidth : 350 MHz (supports gapless signal capture, more than 4 times that of traditional EMI receivers)
- Resolution Bandwidth : Supports dual modes: CISPR (200 Hz/9 kHz/120 kHz/1 MHz) and MIL-STD (10% step)
- DANL : -174 dBm (1 GHz, with preamplifier), more than 10 dB improvement over similar products
- Third-Order Intercept Point (TOI) : +20 dBm (1 GHz), ensuring reliable measurements in strong signal environments
- Dynamic Range : >123 dB (typical value), meeting the measurement requirements of CISPR 16-1-1:2019 for complex signals
- Time Domain Scan (TDS) : Uses FFT technology to achieve fast signal capture, reducing automotive electronics testing time from 36 hours to 200 seconds
- Accelerated TDS : Further reduces testing time to less than 24 seconds, supporting automated batch testing on production lines
III. Functional Characteristics and Industry Innovation
- Millimeter-wave Support : Covers the 5G FR2 band (24.25-52.6 GHz), and can test out-of-band radiation and spurious signals of 5G base stations
- Real-time Scan (RTS) : Simultaneously displays frequency domain, time domain, and spectrum graphs within a 350 MHz bandwidth, accurately locating transient interference of 5G NR signals
- CAN/LIN Bus Trigger : Supports joint analysis of automotive bus signals and radio frequency signals, quickly diagnosing EMI problems in ADAS systems
- Millimeter-wave Radar Testing : Built-in 77-81 GHz band templates meet the radiated emission (RE) and immunity (RS) testing needs of automotive radar
- SCPI Command Compatibility : Can simulate mainstream spectrum analyzers such as R&S FSW, seamlessly migrating existing test processes
- LXI Class C Standard : Supports remote control and automated testing, adapting to Industry 4.0 production line needs
IV. Typical Application Scenarios
- Out-of-band radiation testing of 5G base stations (supports 3GPP TS 38.104 standard)
- Phase noise assessment of radio frequency chips (built-in dedicated application)
- Radiated emission testing of automotive radar (77 GHz)
- Transient interference diagnosis of ADAS systems (such as collaborative testing of lidar and cameras)
- Wideband noise testing of satellite communication equipment (supports MIL-STD-461G)
- Harmonic suppression measurement of radar systems
- DFS channel monitoring of Wi-Fi 7 (802.11be) devices
- SAR value and radiated spurious emissions (RSE) testing of mobile phones
V. User Value and Industry Impact
- Efficiency Improvement : 350 MHz real-time bandwidth and accelerated TDS technology increase testing efficiency by more than 100 times
- Cost Optimization : Integrates the functions of an EMI receiver, spectrum analyzer, and phase noise tester, reducing equipment procurement costs by 50%
- Technological Foresight Supports amplitude probability distribution (APD) measurements in future CISPR 11 standards, protecting user investment
-
I. Hardware Options
1. Core Function Modules
2. High-Frequency Extension Solutions
3. Frequency Range Upgrade
II. Software Options
1. Compliance Testing
2. Signal Analysis Tools
3. Advanced Features
III. Accessories and Calibration
1. Calibration Kits
2. Test Fixtures and Accessories
IV. Service and Support
1. Calibration and Maintenance
2. Technical Support
V. Core Differences Between N9048B and N9038B
VI. Combination Recommendations
1. Basic EMI Testing
- N9048B-100 (Basic Configuration) + N9048B-501 (CISPR Certification) + 11970-60001 (Calibration Kit)
Applicable Scenarios : Radiation emission testing for consumer electronics and home appliances.
2. High-Frequency Extension Solutions
- N9048B-100 + 85658B-003 (110 GHz Mixer) + 11970-60005 (Millimeter-wave Fixture)
Applicable Scenarios : High-frequency EMI testing for automotive radar and satellite communication equipment.
3. R&D and Debugging
- N9048B-100 + N9048B-402 (Phase Noise) + N9048B-203 (RTSA)
Applicable Scenarios : Oscillator design, high-speed data link signal integrity analysis.
VII. Notes
- Millimeter-wave mixers (such as 85658B-003) need to be paired N9048B-105 and require separate calibration.
- High-frequency test fixtures (such as 11970-60005) must match the mixer interface.
- Some software options (such as N9048B-401 ) require separate authorization and activation.
- The 5G NR analysis function requires 89600 VSA software 。
- Millimeter-wave mixers (such as the 85658B series) may be subject to export controls; compliance must be confirmed in advance.
- N9048B-100 (Basic Configuration) + N9048B-501 (CISPR Certification) + 11970-60001 (Calibration Kit)
Previous Page
Previous Page
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us