-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
ESW EMI test receiver 1 Hz to 8 GHz for compliance testing
Category:
EMI test receiver
Authentication level
Product Attachment:
- Product Description
- Selection
-
- Brand: 罗德与施瓦茨
- Commodity name: ESW EMI test receiver 1 Hz to 8 GHz for compliance testing
- Brand: Rohde & Schwarz
In-depth Analysis of the R&S®ESW EMI Test Receiver: A Precise Choice for High-Frequency Electromagnetic Compatibility Testing
I. Product Positioning and Core Value
II. Core Technical Indicators and Performance Advantages
- Frequency Range ：1 Hz to 44 GHz (supports 8/26.5/44 GHz multi-stage frequency options)
- Real-time Bandwidth ：80 MHz (standard), expandable to 160 MHz (optional), enabling gapless capture of transient signals
- Resolution Bandwidth ：Supports dual modes: CISPR (200 Hz/9 kHz/120 kHz/1 MHz) and MIL-STD (10% step)
- Displayed Average Noise Level (DANL) ：-174 dBm (1 GHz, with preamplifier), more than 10 dB improvement over similar products
- Phase Noise ：-114 dBc/Hz (10 kHz offset, 1 GHz)
- Amplitude Accuracy ：±0.37 dB (1 GHz), far exceeding CISPR standard requirements
- Third-Order Dynamic Range ：116 dB (1 GHz)
- Third-Order Intercept Point (TOI) ：+20 dBm (1 GHz), ensuring reliable measurements in strong signal environments
III. Functional Characteristics and Innovative Design
- Built-in CISPR 16-1-1 and MIL-STD-461F standard test templates, supporting various detection methods such as peak, quasi-peak, and RMS average
- Real-time spectrum monitoring function quickly locates out-of-specification signals, shortening testing time
- Time Domain Scanning (TDS) ：Achieves fast signal capture through FFT technology, suitable for dynamic scenarios such as automotive electronics
- Enhanced Diagnostic Tools ：Supports functions such as spectrum diagrams, bar charts, and cursor scaling for detailed signal analysis
- Phase Noise Measurement ：Built-in dedicated application to meet the phase noise evaluation needs of RF devices
- SCPI Command Compatibility ：Can simulate mainstream spectrum analyzers such as Keysight N9038B, facilitating users to quickly migrate testing processes
- LXI Class C Standard ：Supports remote control and automated testing, improving production line efficiency
IV. Typical Application Scenarios
- Radiation emission (RE) and conducted emission (CE) testing of devices such as mobile phones and laptops, ensuring compliance with FCC, CE, and other certification standards
- EMI diagnosis of in-vehicle radar and ADAS systems, supporting time-domain and frequency-domain joint analysis of CAN/LIN bus signals
- Out-of-band radiation testing of base stations and RF chips, assisting in the compliance verification of new technologies such as 5G NR and Wi-Fi 6E
- Wideband noise and spurious signal testing of satellite communication equipment and radar systems, meeting military standards such as MIL-STD-461F
V. User Value and Industry Impact
- Efficiency Improvement ：80 MHz real-time bandwidth and fast FFT scanning can reduce testing time by more than 30%
- Cost Optimization ：Integrating the functions of an EMI receiver and a spectrum analyzer reduces equipment procurement and maintenance costs
- Technological Foresight ：Supports amplitude probability distribution (APD) measurement in future CISPR 11 standards, protecting user investment
-
I. Hardware Options
1. Core Functional Modules
2. RF Front-End Optimization
3. High-Frequency Extension Scheme
II. Software Options
1. Compliance Testing
2. Signal Analysis Tools
3. Advanced Functions
III. Accessories and Calibration
1. Calibration Kits
2. Test Cables and Fixtures
IV. Service and Support
1. Calibration and Maintenance
2. Technical Support
V. Differences between ESW series models
VI. Combination Recommendations
1. Basic EMI Test
- ESW8 (Basic configuration) + ESW-K34 (CISPR certification) + 11970-60001 (Calibration kit)
Applicable Scenarios : Radiated emission testing of consumer electronics and home appliances.
2. High-frequency Expansion Scheme
- ESW44 + ESW-B1000R (970 MHz bandwidth) + 11970-60005 (Millimeter-wave fixture)
Applicable Scenarios : High-frequency EMI testing of automotive radar and satellite communication equipment.
3. R&D and Debugging
- ESW26 + ESW-K52 (Phase noise) + ESW-K62 (RTSA enhancement)
Applicable Scenarios : Oscillator design, high-speed data link signal integrity analysis.
VII. Notes
- Millimeter-wave mixers (such as ESW-110) need to be used with external mixers and require separate calibration.
- High-frequency test fixtures (such as 11970-60005) must match the mixer interface.
- Some software options (such as ESW-K51 ) require separate authorization and activation.
- 5G NR analysis function requires 89600 VSA software.
- Millimeter-wave mixers (such as ESW-110) may be subject to export controls and require prior confirmation of compliance.
- ESW8 (Basic configuration) + ESW-K34 (CISPR certification) + 11970-60001 (Calibration kit)
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us