-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
E5080B ENA Vector Network Analyzer 100kHz to 32GHz
Category:
Network analyzer
Desktop network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: E5080B ENA Vector Network Analyzer 100kHz to 32GHz
- Brand: Keysight Technologies
- Wide Frequency Range Frequency coverage ranges from 9kHz to 4.5/6.5/9/14/20GHz, or from 100kHz to 26.5/32/44/53GHz, meeting the testing needs of different frequency bands.
- Large Dynamic Range It features a wide dynamic range of 140dB (10Hz IF bandwidth), enabling accurate measurement of both large and weak signals. This effectively distinguishes signal components of different amplitudes. For example, when measuring high-gain amplifiers or low-loss filters, the transmission and reflection characteristics of the signal can be clearly observed.
- High Measurement Accuracy Trace noise as low as 0.0015dB rms (4GHz carrier, 10kHz IFBW), and temperature stability of 0.005dB/°C (typical value, 4GHz carrier), ensures the accuracy and stability of the measurement results. Reliable measurement data is provided even during long-term testing.
- Fast Measurement Speed For 2-port calibration, narrow sweep width, and 201 scan points, the typical test time is 2.2ms (1MHz IFBW). This allows for quick completion of measurement tasks, improving testing efficiency and making it suitable for mass production testing and rapid verification in R&D.
- Rich Functionality Built-in options include DC power supply, bias T, pulse generator, and pulse modulator, enabling more comprehensive device characterization. It also has various software application functions such as spectrum analysis, pulsed RF measurement, vector mixer measurement, and noise figure measurement. One instrument can meet multiple testing needs, reducing the complexity and cost of the testing system.
- User-Friendly Operation It uses an intuitive touchscreen graphical user interface with a 12.1-inch high-resolution large screen, making it easy to operate and learn. It also uses the same user interface (UI) and SCPI commands as other Keysight network analyzers (such as PNA, PXI VNA, or USB VNA), allowing users to seamlessly switch and operate between different instruments.
- Flexible Port Configuration Available in 2-port and 4-port options, users can configure according to specific testing needs. The 2-port is suitable for simple single-ended device testing, while the 4-port can be used for more complex differential or multi-port device measurements.
-
I. Hardware Options
1. Test Fixture and Port Configuration
- 240 : 9 kHz to 4.5 GHz, unbiased T-type connector
- 260 : 9 kHz to 6.5 GHz, unbiased T-type connector
- 290 : 9 kHz to 9 GHz, unbiased T-type connector
- 2D0 : 9 kHz to 14 GHz, biased T-type connector
- 2K0 : 9 kHz to 20 GHz, biased T-type connector
- 2L0 : 100 kHz to 26.5 GHz, biased T-type connector
- 2M0 : 100 kHz to 32 GHz, biased T-type connector
- 2N0 : 100 kHz to 44 GHz, biased T-type connector
- 2P0 : 100 kHz to 53 GHz, biased T-type connector
- 440 : 9 kHz to 4.5 GHz, unbiased T-type connector
- 460 : 9 kHz to 6.5 GHz, unbiased T-type connector
- 490 : 9 kHz to 9 GHz, unbiased T-type connector
- 4D0 : 9 kHz to 14 GHz, biased T-type connector
- 4K0 : 9 kHz to 20 GHz, biased T-type connector
- 4L0 : 100 kHz to 26.5 GHz, biased T-type connector
- 4M0 : 100 kHz to 32 GHz, biased T-type connector
- 4N0 : 100 kHz to 44 GHz, biased T-type connector
- 4P0 : 100 kHz to 53 GHz, biased T-type connector
- 442/462/492/4D2/4K2/4L2/4M2/4N2/4P2 : The corresponding frequency range is the same as the above 4-port configuration, with the addition of a second signal source to support dual-tone testing.
2. Core Function Expansion
- 1E5 : High-stability time base, improves frequency measurement accuracy (long-term stability ±0.005 dB/°C).
- 175 : Analog input/output interface, supports external device control (such as pulse triggering).
- 172 : GPIB interface, facilitates remote control and automated testing.
- 021/022 : Pulse modulator, used for the internal first and second sources respectively, supports pulsed RF testing (pulse width as low as 10 ns).
- 120/140 : Internal biased tee, adds DC bias capability to 2-port or 4-port (up to 20 GHz).
3. Spectrum Analyzer Hardware
- 090-098 : Covers spectrum analysis functions from 9 kHz to 53 GHz, supporting harmonic and spurious signal analysis.
- 090 : 4.5 GHz
- 091 : 6.5 GHz
- 092 : 9 GHz
- 093 : 14 GHz
- 094 : 20 GHz
- 095 : 26.5 GHz
- 096 : 32 GHz
- 097 : 44 GHz
- 098 : 53 GHz
4. Noise Figure Measurement
- 29A : Vector-corrected noise figure measurement option, supports noise characteristic analysis of low-noise amplifiers and other devices.
5. Calibration and Accessories
- 1A7 : Calibration document (including uncertainty and tolerance analysis).
- 1NC : Type-N connector configuration, suitable for standard RF testing.
- U8487A : USB power sensor (10 MHz to 50 GHz), used for power measurement.
- 1CM/1CP : Rack mounting kit (with or without handle).
II. Software Options
1. Basic Measurement Tools
- 790 : Measurement Wizard Assistant (MWA), simplifies complex test procedures.
- 010 : Time-domain analysis function, supports TDR (Time Domain Reflectometer) and gated measurements.
- S96010B : Basic time-domain analysis software, used for impedance matching and fault location.
2. Advanced Applications
- S96086B : Gain compression measurement, evaluates amplifier linearity.
- S96007B : Automatic fixture removal, eliminates the influence of the test fixture on the measurement results.
- S96083B : Vector mixer/converter measurement, supports phase and amplitude analysis of frequency converter devices.
- S96090B : Spectrum analysis software, works with hardware options to achieve high-precision spectrum testing.
- S96029B : Vector-corrected noise figure measurement, improves noise figure test accuracy.
- S96025B : Basic pulsed RF measurement, supports S-parameter analysis of pulsed signals.
- S96552B : Multi-port calibration assistant, simplifies the calibration process for four-port and above networks.
3. Other Functions
- S96088B : Source phase control, used for multi-signal source synchronous testing.
- S96087B : Intermodulation distortion measurement, analyzes the nonlinear characteristics of devices.
- S96041B : Impedance analysis, supports material dielectric constant and loss tangent testing.
III. Key Parameter Comparison
IV. Recommended Configuration Combinations
- Hardware: 2-port (240/260) + 120 bias tee + 1E5 time base
- Software: 790 Measurement Wizard + S96010B Time Domain Analysis
- Hardware: 4-port (4P0) + 140 bias tee + 098 spectrum analyzer
- Software: S96083B Vector Mixer Measurement + S96090B Spectrum Analysis
- Hardware: 4-port (440) + 172 GPIB interface + 021 pulse modulator
- Software: S96007B Automatic Fixture Removal + S96025B Pulse RF Measurement
Previous Page
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us