-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
E5061B ENA Impedance Analyzer 100Khz-3Ghz Vector Network Analyzer
Category:
Impedance analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: E5061B ENA Impedance Analyzer 100Khz-3Ghz Vector Network Analyzer
- Brand: Keysight Technologies
I. Hardware Options
1. Test Fixture and Port Configuration
- 50 Ω Configuration
- 115/135 : Transmission/Reflection tester, frequencies are 100 kHz to 1.5 GHz/3 GHz respectively.
- 215/235 : S-parameter tester, frequency coverage corresponds to the above, supporting full two-port calibration.
- 75 Ω Configuration
- 117/137 : Transmission/Reflection tester, suitable for cable television (CATV) component testing.
- 217/237 : S-parameter tester, extended power range (-45 to +10 dBm), adapted to 75 Ω impedance devices.
- 3L5 : 5 Hz to 3 GHz full-band S-parameter testing, built-in 1 MΩ high impedance input and DC bias source supporting low-frequency circuits (such as power integrity analysis) and radio frequency component testing.
- 3L4/3L3 : Frequency ranges are 5 Hz to 1.5 GHz/500 MHz respectively, suitable for cost-sensitive low-frequency applications.
2. Function Expansion
- 005 Impedance Analysis
Integrates network analysis and impedance testing, supporting the extraction of impedance parameters of capacitors, inductors, resonators, and other components, and can analyze equivalent circuit models. - 010 Time Domain Analysis/Fault Location
Combines TDR (Time Domain Reflectometer) to locate impedance discontinuities in cables or connectors, with a resolution of 0.1 mm. - 006 Wireless Power Transmission (WPT) Analysis
Real-time measurement of energy transfer efficiency between coils, supporting arbitrary load impedance settings, suitable for wireless charging system development.
3. Calibration and Accessories
- 85032F N-type mechanical calibration kit
Covers 30 kHz to 9 GHz, including open, short, and load standard components, ensuring basic calibration accuracy. - N7550A Electronic Calibration (ECal) Module
Supports fast two-port calibration, reducing manual operation errors, and adapting to high-frequency testing scenarios. - 8120-6469/6468 Test Cables
Adaptable to 50 Ω and 75 Ω systems respectively, providing stable signal transmission.
II. Software Functions
- Built-in VBA Programming
Supports automated test script development, allowing customization of measurement processes and improving batch testing efficiency. - Multi-mode Scanning
Flexible switching between linear/logarithmic/power scanning, adapting to the testing needs of different devices such as filters, amplifiers, and antennas. - Impedance Analysis Tool
Combined with option 005 to provide fixture compensation and equivalent circuit analysis, suitable for material dielectric characteristics and component modeling.
III. Key Parameters and Comparison
IV. Application Scenarios
- Tests the impedance characteristics of DC-DC converters and power distribution networks (PDN), supporting wideband measurement from 5 Hz to 3 GHz.
- Tests the S-parameters of antennas, filters, and amplifiers, supporting 50 Ω/75 Ω dual impedance modes.
- Locates cable faults using option 010, improving signal transmission quality.
- Evaluates the RF performance of MRI coils and in-vehicle radar modules to ensure electromagnetic compatibility.
- Tests the low-frequency characteristics (such as audio response) of sensors and communication modules.
- Built-in time-domain analysis and impedance testing functions, suitable for teaching demonstrations and basic experiments.
- Custom measurement processes can be implemented through VBA programming, reducing learning costs.
Previous Page
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us