-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
N5232B PNA-L Microwave Network Analyzer 300 kHz to 20 GHz, 2-port and 4-port (single built-in source)
Category:
Network analyzer
Desktop network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N5232B PNA-L Microwave Network Analyzer 300 kHz to 20 GHz, 2-port and 4-port (single built-in source)
- Brand: Keysight Technologies
5232B Vector Network Analyzer (Keysight Technologies)
Main Technical Indicators
- Frequency Range : 300 kHz to 20 GHz (covering the microwave frequency band, supporting 5G, satellite communication, and radar component testing).
- Dynamic Range : Typical value 133 dB (2 ports, 10 kHz IF bandwidth, accurate signal discrimination even in strong noise environments).
- Output Power : Range from -120 dBm to +13 dBm (with power calibration, supporting power scanning to adapt to low-noise amplifiers, power amplifiers, etc.).
- Measurement Points : Supports up to 32,001 measurement points (fine sampling frequency response, capturing subtle characteristics such as filter stopband fluctuations and impedance matching anomalies).
- Intermediate Frequency Bandwidth (IF BW) : Adjustable from 1 Hz to 15 MHz (narrow bandwidth improves sensitivity, wide bandwidth speeds up mass production testing).
- Port Configuration : Supports 2-port or 4-port configuration (4-port mode efficiently completes full S-parameter measurement of multi-port networks).
Core Functional Characteristics
- Multi-parameter Measurement Capability ：
- Basic functions: S-parameters (amplitude, phase, group delay), impedance/admittance, voltage standing wave ratio (VSWR).
- Advanced functions: Gain compression (AM/AM, AM/PM), harmonic distortion (2nd/3rd harmonic), intermodulation distortion (IMD, 2-tone test). Noise figure measurement requires an optional accessory (such as the N1996A noise figure module).
- Intelligent Calibration Technology ：
- Supports electronic calibration kit (ECal) for fast calibration, completing multi-port calibration within 10 seconds, reducing the complexity of traditional mechanical calibration.
- Built-in fully automatic calibration wizard, adaptable to on-chip testing, module testing, and antenna testing scenarios.
- Time Domain Analysis Function ：
- Generates time-domain response through inverse Fourier transform (IFT) of frequency-domain data, locating transmission line discontinuities (such as cable faults and PCB trace impedance changes).
- Flexible Expansion and Connection ：
- Can be connected to millimeter-wave broadband modules (such as 110 GHz band extension) to meet higher frequency R&D needs;
- Equipped with USB, LAN, and GPIB interfaces, supporting automated test system integration (such as LabVIEW programming control).
Typical Application Scenarios
- Wireless Communication Device Testing ：
- Radio frequency front-end modules (PA/LNA/filter/duplexer): Measure insertion loss, isolation, and out-of-band suppression to ensure compliance with standards such as 5G and Wi-Fi 6E.
- Antennas and arrays: Analyze VSWR, radiation efficiency, and port isolation to assist in the design optimization of base station antennas and IoT terminal antennas.
- Microwave and Millimeter-wave Component R&D ：
- High-frequency devices (mixers, frequency converters, attenuators): Test frequency conversion loss and phase linearity to meet the high-precision requirements of satellite communication and radar transceiver components.
- On-chip radio frequency integrated circuits (RFICs): Perform wafer-level testing with a probe station to extract S-parameters for circuit modeling.
- Material and EMC Characterization ：
- Dielectric constant/permeability measurement of dielectric materials: Analyze high-frequency characteristics through coaxial or waveguide fixtures, supporting the R&D of circuit board substrates and microwave ceramics.
- EMC pre-testing: Locate electromagnetic leakage points of equipment to assist in filter design and grounding optimization.
- Education and Research ：
- University laboratories: Used as a teaching tool for radio frequency principles, helping students master the operation of vector network analyzers and high-frequency circuit analysis.
- Research institutions: Supports basic characteristic measurements of new devices such as metamaterials and tunable filters.
Summary of Advantages
-
Hardware Configuration Options
- N5232B-200 : 2-port basic hardware configuration, suitable for basic S-parameter measurements of simple two-port network elements (such as RF filters, amplifiers), covering a frequency range from 300kHz to 20GHz.
- N5232B-216 : 2-port configurable test setup + source attenuator, supporting flexible adjustment of test signal power, suitable for analyzing device performance changes at different power levels (e.g., power amplifiers, mixers), includes source attenuator calibration file.
- N5232B-400 : 4-port basic hardware configuration, suitable for basic scenarios requiring multi-port collaborative testing (e.g., preliminary evaluation of MIMO RF systems), supporting the 20GHz frequency band.
- N5232B-416 : 4-port configurable test suite + source attenuator, supporting precise testing of complex multi-port devices (e.g., multi-antenna systems, RF matrix switches), power control can be optimized via the source attenuator.
Calibration and Certification Options
- N5232B-1A7 : Calibration + Uncertainty + Guard Band (non-accredited), for daily calibration, providing measurement uncertainty and guard band information, suitable for R&D and production test environments.
- N5232B-UK6 : Commercial calibration certificate with test data, requiring an official calibration certificate to prove instrument status, meeting commercial compliance requirements (e.g., contract acceptance, third-party certification).
- N5232B-A6J : ANSI Z540-1-1994 Calibration, ANSI standard compliant calibration, suitable for industrial or laboratory environments with strict calibration procedure requirements.
Software and Feature Extension Options
- S93007B : Automatic fixture removal, suitable for wafer testing or frequent fixture change scenarios, improving test efficiency and accuracy (e.g., semiconductor device mass production testing), supports PNA-L Series B models.
- S93010B : Time domain analysis, analyzes signal transmission characteristics (e.g., delay, reflection), suitable for high-speed digital circuit design.
- S93011B : Enhanced time domain analysis software with TDR option, for in-depth analysis of high-speed signal transmission line effects (e.g., impedance mismatch, signal integrity issues), compatible with PNA-L Series.
- S93082B : Scalar mixer/converter measurements, measures performance parameters of scalar mixers or converters (e.g., conversion loss, isolation), used for RF front-end design.
- S930900B : Spectrum analysis (up to 8.5GHz), observing signal frequency components and distribution, finding spurious emissions, harmonics (e.g., signal quality evaluation of low-frequency band communication modules).
- S930901B : Spectrum analysis (up to 13.5GHz), covering a wider frequency band, suitable for analysis of high-frequency communication modules or complex signal environments.
- S93898B : Built-in performance test software, provides calibration and performance testing tools, ensuring long-term accuracy and reliability of the instrument (e.g., regular maintenance verification).
Installation and Storage Options
- N5232B-1CM : Rack mount kit without handles, integrated into standard rack-mount test systems, saving space and facilitating multi-device collaboration (e.g., centralized monitoring of production lines).
- N5232B-1CP : Rack mount kit with handles, convenient for handling and operation, suitable for laboratory environments where frequent movement or position adjustment is required.
- N5232B-SSD : Additional removable solid-state drive, storing large amounts of test data, calibration files, supporting long-term continuous testing or historical data retrieval, recommended for use with high-frequency spectrum analysis (e.g., S930901B).
Supplementary Notes
- Calibration Option Differences : 1A7 provides basic calibration and uncertainty assessment, suitable for routine testing; UK6 provides commercial certificates with test data, suitable for contractual scenarios; A6J complies with ANSI standards, suitable for strictly regulated environments.
- Software Option Extensions : S93011B combined with TDR can analyze signal integrity, S93082B focuses on scalar device testing, S930901B supplements high-frequency spectrum analysis capabilities, S93898B simplifies the calibration process.
- Hardware Compatibility : The source attenuator of the 216 option can be used with S93082B to optimize power control during mixer testing; the SSD option is recommended for use with high-frequency spectrum analysis (e.g., S930901B) to ensure large data storage.
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us