-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
N5222B PNA Microwave Network Analyzer, 900 Hz/10 MHz to 26.5 GHz
Category:
Network analyzer
Desktop network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N5222B PNA Microwave Network Analyzer, 900 Hz/10 MHz to 26.5 GHz
- Brand: Keysight Technologies
Core Technical Indicators
- Frequency Range : 10 MHz to 26.5 GHz (supports low-frequency extension to 900 Hz, meeting the full-range testing needs from audio to microwave bands).
- Dynamic Range : Typical Value 135 dB (System-level dynamic range, supporting high-precision measurement of weak signals and reducing the impact of noise interference).
- Output Power : Maximum +13 dBm (power scan range up to 40 dB, compatible with linear/nonlinear characteristic testing of active devices, such as amplifier gain compression analysis).
- Measurement Accuracy : Trace noise as low as 0.0025 dB rms, phase noise better than 0.08° rms, ensuring high repeatability of S-parameter (amplitude/phase) measurements.
- Scan Speed : 201-point scan time as fast as 5 ms (fast scan mode), significantly improving mass production testing efficiency.
- Port Configuration : Standard 2 ports ，supports upgrade to 4-port dual-source configuration, expandable to multi-port measurement (such as 8 ports, 12 ports) via an external switch matrix.
Functional Characteristics
- Full-band Measurement Capability ：
- Supports basic parameters (S11/S21, etc., 4-port S-parameters, VSWR, impedance/admittance) and advanced parameters (group delay, complex isolation, differential mode of balanced devices) measurement.
- Built-in nonlinear measurement function, which can analyze intermodulation distortion (IMD3), harmonic output, AM/AM and AM/PM conversion characteristics, suitable for the R&D of power amplifiers, mixers and other active devices.
- Intelligent Calibration and User Experience ：
- Compatible with electronic calibration kits (ECal) and mechanical calibration kits, supporting one-click fully automatic calibration (completed within 15 seconds), and providing customized calibration solutions for on-wafer, in-fixture, antenna and other scenarios.
- 12.1-inch color touch screen, supporting gesture operation (zoom, drag), real-time display of Smith chart, polar plot, time-domain waveform and other multi-format curves, convenient data export (CSV/image/XML).
- Time-Domain and Material Analysis Tools ：
- Time-Domain Analysis : Locates transmission line faults (such as cable breaks, PCB discontinuities) through inverse Fourier transform (IFT) of frequency domain data, supports gated technology to separate multipath signals, with a resolution of 1 mm (electrical length).
- Material Characterization : In conjunction with coaxial probes, waveguide fixtures or free-space testing devices, measure the dielectric constant (εr), permeability (μr), and loss tangent (tanδ) of dielectric materials, and support PLTS software for modeling and data fitting.
- Flexible Expansion and System Integration ：
- Can be externally connected to frequency extension modules (such as 9 kHz low-frequency source or 26.5 GHz high-frequency head), adapting to wider frequency band requirements; supports power sensor real-time monitoring of output power, improving measurement stability.
- Equipped with USB 3.0, LAN (LXI), GPIB interfaces, compatible with LabVIEW, MATLAB and Keysight PathWave automation software, seamlessly integrating into production lines or laboratory testing systems.
Typical Application Scenarios
- Wireless Communication and RF Device R&D ：
- Test the insertion loss and out-of-band suppression of 5G intermediate frequency band (3.5 GHz/4.9 GHz) filters and duplexers, and evaluate the gain and noise figure of millimeter-wave front-end components (such as 28 GHz low-noise amplifiers).
- Analyze the signal integrity of high-speed digital interfaces (such as PCIe 5.0, 10Gbps Ethernet), and measure the loss and reflection characteristics of PCB traces and connectors.
- Radar and Remote Sensing Technology ：
- Verify the standing wave ratio and port isolation of 24 GHz/77 GHz automotive radar antennas, and support amplitude-phase consistency calibration of multi-channel phased array antennas.
- Measure the linearity and dynamic range of remote sensing sensors (such as meteorological radar receiving front-ends) to ensure signal capture accuracy in complex environments.
- Education, Research and Production Testing ：
- University Laboratories : As a teaching tool for RF principles, demonstrating network analyzer operation, calibration methods and microwave circuit design verification processes.
- Industrial Production Lines : High-speed scan mode adapts to batch screening of filters, couplers and other passive devices, and built-in statistical functions monitor the yield in real time.
Summary of Advantages
-
Hardware Options
Part Number N5222B-200 2-port, basic hardware configuration Part Number N5222B-201 2-port, with configurable test set, reference mixer switch Part Number N5222B-205 2-port, with configurable test set, reference mixer switch, bias tee, low-frequency extension Part Number N5222B-217 2-port, with configurable test set, reference mixer switch, source and receiver attenuators Part Number N5222B-219 2-port, with configurable test set, reference mixer switch, source and receiver attenuators, bias tee Part Number N5222B-220 2-port, with configurable test set, reference mixer switch, source and receiver attenuators, bias, low-frequency extension Part Number N5222B-400 4-port, with second source Part Number N5222B-401 4-port, with second source, configurable test set, reference mixer switch Part Number N5222B-405 4-port, with second source, configurable test set, reference mixer switch, bias tee, low-frequency extension Part Number N5222B-417 4-port, with second source, configurable test set, reference mixer switch, source and receiver attenuators Part Number N5222B-419 4-port, with second source, configurable test set, reference mixer switch, source and receiver attenuators, bias tee Part Number N5222B-420 4-port, with second source, configurable test set, reference mixer switch, source and receiver attenuators, bias, low-frequency extension Part Number N5222B-210 2-port, with metrology configuration Part Number N5222B-410 4-port, with second source, metrology configuration Calibration Documentation
Part Number N5222B-1A7 Calibration + Uncertainty + Guard Band (Unaccredited) Part Number N5222B-A6J ANSI Z540-1-1994 Calibration Part Number N5222B-UK6 Commercial Calibration Certificate with Test Data Other Hardware Features
Part Number N5222B-020 Add IF Input Part Number N5222B-021 Add Pulse Modulator to Internal Source 1 Part Number N5222B-022 Add Pulse Modulator to Internal Source 2 N5222B-UNY Enhanced Low Phase Noise Performance Software with Subscription
S93007B Automatic Fixture Removal S93010B Time Domain Analysis S93011B Enhanced Time Domain Analysis using TDR S93015B Real-Time S-Parameter and Power Measurement Uncertainty S93025B Basic Pulsed RF Measurements S93026B Advanced Pulsed RF Measurements S93029B Noise Figure Measurement with Vector Correction S93080B Frequency Offset Measurement S93082B Scalar Mixer/Converter Measurements S93083B Vector and Scalar Mixer/Converter Measurements S93084B Embedded-LO Functionality S93086B Gain Compression Measurement S93087B Intermodulation Distortion Measurement S93088B Source Phase Control S93089B Differential and I/Q Device Measurements S930900B Spectrum Analysis up to 8.5 GHz S930901B Spectrum Analysis up to 13.5 GHz S930902B Spectrum Analysis up to 26.5 GHz S930909B Spectrum Analysis up to 90 GHz S93093B Spectrum Analysis up to 125 GHz S93094B Spectrum Analysis up to and beyond 125 GHz S93118B Fast CW Measurements S93460B True-mode Stimulus S93551B N-Port Measurements S93898B Built-in Performance Test Software S930317B Phase Noise Measurement up to 70 GHz S930321B Phase Noise Measurement up to 125 GHz S94601B Device Measurement eXpert - DMX S94602B Limit Assistant S93051B IQ Data Bandwidth up to 4 GHz S930709B Modulation Distortion up to 90 GHz S930712B Modulation distortion up to 125 GHz S930713B Modulation distortion up to 125 GHz and above S930700B Modulation distortion up to 8.5 GHz S930701B Modulation distortion up to 13.5 GHz S930702B Modulation distortion up to 26.5 GHz S93072B Internal 6 GHz arbitrary waveform generation Auxiliary materials
Part number N5222B-1CM Rack-mount kit for handleless installation Part number N5222B-1CP Rack-mount kit for installation with handle Part number N1966A Pulse/IO adapter Part number N6171A MATLAB software N5222B-Solid State Drive Additional removable solid-state drive U8485A USB power sensor; 10MHz-33GHz; -33dBm to +20dBm
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us