-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
Keysight Technologies N5247B PNA-X Microwave Network Analyzer, 900 Hz/10 MHz to 67 GHz
Keysight Technologies N5247B PNA-X Vector Network Analyzer: A Precision Engine for Full-Band RF Testing I. Core Technical Specifications and Performance Breakthroughs As the flagship model of Keysight's PNA-X series, the N5247B, with its base frequency coverage of 10 MHz to 67 GHz (extensible to 1.5 THz with millimeter-wave expansion modules), has become a benchmark device in the high-frequency testing field. Its core parameters demonstrate exceptional engineering design: Ultra-wide dynamic range and low-noise performance Receiver dynamic range up to 129 dB (@60 GHz), combined with -118 dBm noise floor, allows for precise separation of the main carrier and weak harmonics in complex signals. In the millimeter-wave band (such as 5G NR's 26-28 GHz), its system dynamic range remains above 110 dB, ensuring the accuracy of linearity tests for RF devices (such as power amplifiers and mixers). High-precision phase and amplitude stability Temperature stability is 0.03 dB/°C for amplitude and 0.6°/°C for phase, coupled with built-in electronic calibration components.
Category:
Network analyzer
Desktop network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: Keysight Technologies N5247B PNA-X Microwave Network Analyzer, 900 Hz/10 MHz to 67 GHz
- Brand: Keysight Technologies
Keysight Technologies N5247B PNA-X Vector Network Analyzer: A Precision Engine for Full-Band RF Testing I. Core Technical Specifications and Performance Breakthroughs As the flagship model of Keysight's PNA-X series, the N5247B, with its base frequency coverage of 10 MHz to 67 GHz (extensible to 1.5 THz with millimeter-wave expansion modules), has become a benchmark device in the high-frequency testing field. Its core parameters demonstrate exceptional engineering design: Ultra-wide dynamic range and low-noise performance Receiver dynamic range up to 129 dB (@60 GHz), combined with -118 dBm noise floor, allows for precise separation of the main carrier and weak harmonics in complex signals. In the millimeter-wave band (such as 5G NR's 26-28 GHz), its system dynamic range remains above 110 dB, ensuring the accuracy of linearity tests for RF devices (such as power amplifiers and mixers). High-precision phase and amplitude stability Temperature stability is 0.03 dB/°C for amplitude and 0.6°/°C for phase, coupled with built-in electronic calibration components.
Keysight Technologies N5247B PNA-X Vector Network Analyzer: A Precision Engine for Full-Band RF Testing
I. Core Technical Specifications and Performance Breakthroughs
II. Key Functions and Innovative Technologies
- X-parameter measurement ：Through dual-tone excitation technology, it can accurately extract the large-signal S-parameters of active devices, analyze intermodulation distortion (IMD), gain compression, and other non-linear characteristics, suitable for the design verification of gallium nitride (GaN) power amplifiers.
- Mixer Test Kit ：Integrates vector mixer calibration functions, allowing for direct measurement of the conversion loss, group delay, and local oscillator (LO) drive characteristics of frequency conversion devices without the need for an external reference mixer.
- ECal Fast Calibration ：Through intelligent electronic calibration components, it can automatically compensate for the loss of test cables and fixtures, controlling measurement uncertainty within ±0.1 dB.
- SCPI Script Generator ：Built-in code recording function, can automatically generate test sequences, simplifying the collaborative operation process with external devices (such as oscilloscopes and signal sources).
- 5G Communication Testing ：Supports EVM (error vector magnitude) and ACLR (adjacent channel leakage ratio) measurements for the NR standard, can analyze the modulation quality of 200 MHz bandwidth signals, and meets the consistency testing requirements of base stations and terminal chips.
- Satellite and Aerospace Electronics ：Through the digital demodulation function of the 89600 VSA software, it can parse satellite signals of protocols such as DVB-S2X and OneWeb, and evaluate the group delay and gain flatness of the payload.
- Automotive Radar Certification ：In the 77-81 GHz band, it can verify the range resolution (≤0.1 m) and speed measurement accuracy of the radar module, meeting the ISO 26262 functional safety standard.
III. Typical Application Areas and Industry Value
- Base Station RF Index Verification ：In 5G base station deployment, the N5247B can test the transmitter's ACLR, occupied bandwidth (OBW), and spurious emissions to ensure that the signal conforms to the 3GPP standard. Measurements by a certain communication equipment manufacturer show that the deviation between the measured results and the laboratory standard values is less than 0.2 dB.
- Terminal Device Consistency Testing Automated scripts enable rapid testing of receiver sensitivity for mobile phones and CPEs, increasing production line efficiency by over 30%.
- Research and Development Phase Utilizing low phase noise characteristics to analyze the stability of the radar front-end local oscillator signal (phase noise -122 dBc/Hz@10 kHz offset), combined with real-time spectrum functionality to capture inter-pulse interference.
- Production Testing Integrated automatic pulse parameter measurement functionality enables rapid batch detection of automotive radar modules, reducing error rate by an order of magnitude.
- Payload Testing Evaluates the linearity and noise figure of satellite transponders. Real-world measurements at a satellite laboratory show that a 122 dB dynamic range is maintained at the 60 GHz frequency point, ensuring high reliability of the communication link.
- Ground Station Maintenance Monitors the spectral purity of uplink signals to avoid interference with other satellites, supporting multi-channel parallel monitoring and interference source localization.
- In-Vehicle Radar Certification In the 79 GHz band, it can verify the radar module's distance resolution (≤0.1 m) and velocity measurement accuracy. Coupled with a UXR oscilloscope, it enables real-time signal analysis without down-conversion, reducing testing errors by 50%.
- V2X Communication Testing Analyzes the modulation quality of DSRC signals to ensure the real-time performance and anti-interference capability of the vehicle-road collaborative system.
IV. Technical Advantages and Competitive Value
-
Hardware Options
Part Number N5247B-201 2-Port, Configurable Test Set
Part Number N5247B-219 2-Port, Configurable Test Set, Source Attenuator, Receiver Attenuator, Bias Tee
Part Number N5247B-224 2-Port, Configurable Test Set, Source Attenuator, Receiver Attenuator, Bias, Second Source, Combiner, Mechanical Switch
Part Number N5247B-401 4-Port, Configurable Test Set, Second Source
Part Number N5247B-419 4-Port, Configurable Test Set, Second Source, Source Attenuator, Receiver Attenuator, Bias Tee
Part Number N5247B-423 4-Port, Configurable Test Set, Second Source, Source Attenuator, Receiver Attenuator, Bias, Combiner, Mechanical Switch
Part Number N5247B-425 4-Port, Configurable Test Set, Second Source, Attenuator, Combiner, Mechanical Switch, Bias Tee, Low Frequency Extension
Calibration Documentation
Part Number N5247B-1A7 Calibration + Uncertainty + Guard Band (Unaccredited)
Part Number N5247B-A6J ANSI Z540-1-1994 Calibration
Part Number N5247B-UK6 Commercial Calibration Certificate with Test Data
Other Hardware Features
Part Number N5247B-020 Add IF Input
Part Number N5247B-021 Add Pulse Modulator to Internal First Source
Part Number N5247B-022 Add Pulse Modulator to Internal Second Source
N5247B-UNY Enhanced Low Phase Noise Performance
Part Number N5247B-XSB Third RF Source up to 13.5 GHz
Part Number N5247B-E29 Add 70 GHz Noise Receiver
Part Number N5247B-029 Add 50 GHz Noise Receiver
Software with Subscription
S93007B Automatic Fixture Removal
S93010B Time Domain Analysis
S93011B Enhanced Time Domain Analysis using TDR
S93015B Real-Time S-Parameter and Power Measurement Uncertainty
S93025B Basic Pulsed RF Measurements
S93026B Advanced Pulsed RF Measurements
S93027B Mechanical Noise Tuner Control
S93029B Noise Figure Measurement with Vector Correction
S930700B Modulation Distortion up to 8.5 GHz
S930701B Modulation Distortion up to 13.5 GHz
S930702B Modulation Distortion up to 26.5 GHz
S930704B Modulation Distortion up to 43.5 GHz
S930705B Modulation Distortion up to 50 GHz
S930707B Modulation Distortion up to 70 GHz
S93080B Frequency Offset Measurement
S93082B Scalar Mixer/Converter Measurement
S93083B Vector and Scalar Mixer/Converter Measurement
S93084B Embedded-LO Functionality
S93086B Gain Compression Measurement
S93087B Intermodulation Distortion Measurement
S93088B Source Phase Control
S93089B Differential and I/Q Device Measurement
S930900B Spectrum Analysis up to 8.5 GHz
S930901B Spectrum Analysis up to 13.5 GHz
S930902B Spectrum Analysis up to 26.5 GHz
S930904B Spectrum Analysis up to 43.5 GHz
S930905B Spectrum Analysis up to 50 GHz
S930907B Spectrum Analysis up to 70 GHz
S930909B Spectrum Analysis up to 90 GHz
S93093B Spectrum Analysis up to 125 GHz
S93094B Spectrum Analysis up to 125 GHz and above
S93110B Active Thermal Parameter
S93111B Active Thermal Parameter, limited to 50 GHz
S93118B Fast CW Measurement
S93460B True-mode Stimulus
S93551B N-Port Measurement
S93898B Built-in Performance Test Software
S94510B Non-linear Component Characterization
S94511B Non-linear Component Characterization, limited to 50 GHz
S94514B Non-linear X-parameters
S94518B Non-linear Pulse Envelope Domain
S94520B Arbitrary Load Impedance, X-parameters
S94521B Arbitrary Load Control, X-parameters
S94522B Arbitrary Load Control, Device Characterization
S930317B Phase Noise Measurement up to 70 GHz
S930321B Phase Noise Measurement up to 125 GHz
S93072B Internal 6 GHz Arbitrary Waveform Generation
S94601B Device Measurement eXpert - DMX
S94602B Limit Assistant
S93051B IQ Data Bandwidth up to 4 GHz
S94571B Integrated Load Pull for Modulation Distortion Applications, limited to 50 GHz
S94572B Wideband Active Load Pull for Modulation Distortion
S94573B Wideband Active Load Pull for Modulation Distortion, limited to 50 GHz
S94570B Integrated Load Pull for Modulation Distortion Applications
S930709B Modulation Distortion up to 90 GHz
S930712B Modulation Distortion up to 125 GHz
S930713B Modulation Distortion up to 125 GHz and above
Auxiliary Materials
Part Number N5247B-1CM Rack Mounting Kit for Handleless Installation
Part Number N5247B-1CP Rack Mounting Kit for Installation with Handle
Part Number N1966A Pulse/IO Adapter
Part Number N6171A MATLAB Software
N5247B-Solid State Drive Additional Removable Solid State Drive
U8488A Power Sensor; USB Averaging Thermocouple, 10MHz-67GHz
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us