-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
E5062A ENA-L RF Network Analyzer, 300 kHz to 3 GHz
Category:
Desktop network analyzer
Network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: E5062A ENA-L RF Network Analyzer, 300 kHz to 3 GHz
- Brand: Keysight Technologies
I. Basic Performance and Parameters
- Dynamic Range : 120dB (with 10Hz IF bandwidth), effectively distinguishing strong signals from weak signals, showing stable performance when measuring low-loss cables or high-gain amplifiers.
- Trace Noise : 0.005dB rms (with 3kHz IFBW), ensuring the repeatability and reliability of measurement results.
- Temperature Stability : 0.01dB/°C (typical value), maintaining data consistency during long-term testing.
- Fast Scan : Scanning 201 points takes only 25ms (with 30kHz intermediate frequency bandwidth), suitable for mass production testing or R&D scenarios requiring quick verification.
- Flexible Configuration : Supports linear, logarithmic, and segmented scan modes, optimizing testing efficiency according to the characteristics of the device under test.
II. Functional Features and Options
- T/R or S-parameter Measurement : Supports transmission/reflection (T/R) testing instruments or full two-port S-parameter testing instruments to meet different accuracy requirements.
- Port Impedance Selection : Provides 50Ω and 75Ω system impedances, adapting to special applications such as CATV components.
- Extended Power Range : Option 1E1 can extend the output power to -45 to 10dBm, suitable for testing devices requiring a wide power range.
- Fault Location and SRL Analysis : Option 100 supports time-domain analysis, which can locate fault points in cables or transmission lines and perform return loss (SRL) analysis.
- Built-in VBA Programming : Supports automated testing through Visual Basic for Applications, simplifying complex measurement processes.
- Color Touch Screen : Option 016 is equipped with a color touch screen, improving ease of operation.
- Electronic Calibration (ECal) : Optional electronic calibration components, completing two-port calibration through a single connection, reducing errors caused by manual operation.
- Abundant Test Accessories : Supports various connectors such as 50Ω and 75Ω N-type and F-type, adapting to different devices under test.
III. Application Fields
- Testing antennas, filters, amplifiers, and other wireless communication devices, as well as CATV splitters, distribution amplifiers, and other cable television components.
- Evaluating the transmission characteristics of PCB board-level circuits, such as differential signal integrity analysis.
- Measuring the S-parameters of in-vehicle radars and RF modules to ensure their stable performance in complex electromagnetic environments.
- Used as a teaching tool to help students understand the basic principles of RF network analysis; used in research for material dielectric property testing or new device development.
- Performing fast consistency testing of passive devices such as RF cables and connectors on production lines to improve quality inspection efficiency.
IV. Replacement Models and Upgrade Paths
-
I. Hardware Options
1. Test Fixture and Port Configuration
- 150 : 50Ω system impedance, supports transmission/reflection (T/R) testing, suitable for low-cost scenarios.
- 175 : 75Ω system impedance, suitable for cable television (CATV) component measurement, such as splitters and distribution amplifiers.
- 250 : 50Ω system impedance, extended power range (-45 to +10 dBm), supports full two-port calibration, improves measurement accuracy.
- 275 : 75Ω system impedance, also has an extended power range, suitable for 75Ω impedance CATV device testing.
2. Functional Expansion
- 100 : Fault Location Analysis, supports Structural Return Loss (SRL) testing, can quickly locate impedance discontinuities in cables or PCBs.
- 016 : Color touchscreen LCD, enhances intuitive operation, simplifies parameter setting and result viewing.
- 1E1 : Extended power range (-45 to +10 dBm), covers the testing needs of low-power to medium-power devices.
3. Calibration and Accessories
- 85032F : N-type mechanical calibration kit, covering 30 kHz to 9 GHz, includes open, short, and load standards to ensure measurement accuracy. 。
- 85092C : Electronic Calibration (ECal) module, supports fast two-port calibration, reduces human operation errors.
- N-type test cable : Such as 8120-6469 (50Ω) and 8120-6468 (75Ω), adapt to different impedance testing needs.
II. Software Functions
- Built-in VBA Programming : Supports automated test script development, allows customization of measurement processes through Visual Basic for Applications, improves batch testing efficiency.
- Time Domain Analysis : Achieves TDR (Time Domain Reflectometer) measurement through option 100 or built-in function, locates transmission line faults or impedance anomalies.
- Multiple Scan Modes : Supports linear, logarithmic, and power scans, adapting to the testing needs of different devices such as filters, cables, and amplifiers.
III. Key Parameters and Comparison
IV. Application Scenarios
- Test antennas, filters, and amplifiers' S-parameters, support basic performance evaluation of 50Ω impedance devices.
- Combine with option 100 for cable fault location, optimize signal transmission quality.
- 75Ω impedance support, suitable for insertion loss and return loss testing of splitters and distribution amplifiers.
- Extend the power range through option 275 to verify the stability of high-power devices.
- Evaluate the RF performance of in-vehicle radar and communication modules to ensure reliability in complex electromagnetic environments.
- Built-in VBA and multiple scan modes, suitable for teaching demonstrations and basic RF experiments, reducing learning costs.
V. Discontinued and Replacement Suggestions
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us