-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
N5230A PNA-L Network Analyzer, 2-port, up to 6, 13.5, 20, 40, or 50 GHz
Category:
Desktop network analyzer
Network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N5230A PNA-L Network Analyzer, 2-port, up to 6, 13.5, 20, 40, or 50 GHz
- Brand: Keysight Technologies
- Standard : 10MHz to 13.5GHz (2 ports), supporting mainstream frequency bands such as 5G Sub-6GHz (3.5GHz/4.9GHz) and Wi-Fi 6E (6GHz).
- Expansion Options ：
- Option 220/225 : Expands the frequency range to 10MHz to 20GHz, covering the full 5G NR FR1 band (410MHz~26.5GHz) and some low-frequency millimeter-wave bands (24.25-26.5GHz).
- Option 420/425 : Supports 10MHz to 40GHz, covering the complete 5G millimeter-wave FR2 band (24.25-40GHz).
- Option 520/525 : Expands to a maximum of 10MHz to 50GHz, suitable for high-frequency millimeter-wave scenarios (such as satellite communication and 6G pre-research).
- Key Clarifications ：
- No Option 026 : The previously mistakenly written "Option 026" is a millimeter-wave option for other models (such as N5240A) and is unrelated to N5230A.
- Waveguide Module Adaptability : If a waveguide interface (such as WR-75 corresponding to 10-15GHz) is required, an external 11970V series frequency extension module (not an option, but an external accessory) is needed. In this case, the frequency range is limited by the module (for example, 11970V-135 supports 10-18GHz).
- N5230A can cover 24.25-40GHz (5G NR FR2 band) through option 420/425, but does not support the 76-81GHz automotive radar band (requires upgrading to N5240A or a higher model).
II. Revised Core Technical Parameter Table (Frequency-Related Part)
III. Precise Adaptation to Typical Application Scenarios (Correction of Previous Errors)
- Original Incorrect Description :"Measuring 76~81GHz automotive radar front-end components".
- Correct Application : N5230A can cover 24.25-40GHz , suitable for 5G millimeter-wave base station RF module testing (such as 28GHz PA linearity analysis), while 76-81GHz requires using N5240A (26.5-40GHz) or N5242A (10MHz-43.5GHz).
- N5230A option 420/425 supports 24.25-40GHz (5G NR FR2 band), and can be used for 28GHz filter out-of-band suppression testing (such as out-of-band -50dBc@30GHz), but does not support frequencies above 39GHz/40GHz (requires N5240A or higher models).
IV. Strict Explanation of Option Configuration and Calibration Item Matching
- 10MHz~13.5GHz : Use 125A series N-type precision calibration items (50Ω, such as 125A-135, covering 10MHz-18GHz).
- 10MHz~20GHz (Option 220/225) : Requires using 3.5mm precision calibration items (such as 125B-265, covering 10MHz-26.5GHz).
- 10MHz~40GHz (Option 420/425) : Requires using 2.4mm precision calibration items (such as 125C-405, covering 10MHz-40GHz).
- When testing above 20GHz, use Low-loss phase-stable cable (such as Keysight Technologies 85133D series), avoiding the high-frequency loss of ordinary N-type cables (ordinary N-type cables have a loss increase of > 0.5dB/m above 20GHz).
-
I. Hardware Options and Frequency Extension
1. Frequency Range and Port Configuration
- 2 Ports Covers 300 kHz to 6/13.5/20/40/50 GHz, for example:
- 020/025 300 kHz to 6 GHz, basic RF testing.
- 120/125 300 kHz to 13.5 GHz, supports 2/4 ports.
- 220/225 10 MHz to 20 GHz, high-frequency component development.
- 420/425 10 MHz to 40 GHz, 2-port millimeter-wave testing.
- 520/525 10 MHz to 50 GHz, 2-port 5G millimeter-wave evaluation.
- 140/145 300 kHz to 13.5 GHz, supports mixed-mode S-parameters and fixture calibration.
- 240/245 300 kHz to 20 GHz, multi-port testing of balanced devices.
2. Power Extension and Dynamic Range
- Option 025/125 Power range extended to -55 to +13 dBm, built-in 60 dB step attenuator.
- Dynamic Range 108 dB at 20 GHz, trace noise as low as 0.004 dB rms (1 kHz IFBW).
3. Calibration and Accessories
- Mechanical Calibration Kit ：
- 85052D (3.5 mm, 300 kHz to 20 GHz)
- 85052D-001 (2.4 mm, 40/50 GHz)
- Electronic Calibration (ECal) Module N4691A, single-connection fast calibration.
- Test Cable 85131F (3.5 mm, 300 kHz to 20 GHz).
II. Software Functions and Application Scenarios
1. Advanced Measurement Functions
- Pulse RF Test Supports 2 μs pulse width, suitable for dynamic characteristic evaluation of radar modules.
- Mixer/Converter Measurement Automatically measures frequency conversion loss, LO leakage, and other parameters.
- Fixture De-embedding TRL/LRM calibration eliminates the influence of test fixtures.
2. Automation and Compatibility
- Built-in VBA Programming Custom test scripts, batch execution of multi-port scans.
- Multi-Mode Scan Flexible switching between linear/logarithmic/power scans.
3. Typical Applications
- Wireless Communication 5G millimeter-wave antenna, filter S-parameter testing.
- Aerospace Wideband performance evaluation of radar T/R modules.
- Semiconductor Wafer-level component testing, material dielectric property analysis.
III. Discontinued and Replacement Suggestions
- N5230C (300 kHz to 50 GHz, dynamic range 122 dB)
- N5242A (9 kHz to 50 GHz, dynamic range 140 dB)
IV. Configuration Suggestions
- Basic RF Test Option 225 (10 MHz to 20 GHz) + 85052D calibration kit.
- Millimeter-wave Development Option 525 (10 MHz to 50 GHz) + 85052D-001 calibration kit.
- Multi-port Balanced Test Option 245 (300 kHz to 20 GHz, 4 ports) + Mixed-mode S-parameter software
- 2 Ports Covers 300 kHz to 6/13.5/20/40/50 GHz, for example:
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us