-
High-frequency measurement system services Material testing Probe station Microwave anechoic chamber/shielded roomLan Cable Fully Automatic Tester Auto Switch fully automatic testing machine USB 4 / Type-C finished product line test system DisplayPort 2.1 finished product line test system HDMI 2.1 finished product line test system MCIO finished product line testing system Gen-Z finished product line testing system PCIE finished product line test system OCuLink Finished Product Line Test System QSFP/SFP finished product line test system HSD finished product line test system FAKRA finished product line testing system SAS/MiniSAS/SlimSAS Finished Product Line Testing System Raw Cable 20G/40G/50G Bare Wire Test System SATA/eSATA finished product line test system LVDS finished product line testing system Pre-test Integration ProjectElectromagnetic shielding test system Material electromagnetic parameter testing system Resistivity testing system Cable Shielding Effectiveness Test System Conductive gasket shielding effectiveness test system Reflection rate test system for absorbing materials NSS Noise Suppression/Absorption Sheet Performance Evaluation System Pre-compatibility testing systemUltra-low temperature vacuum probe station Automated probe station Manual probe station Displacement platform
N5227B PNA Microwave Network Analyzer, 900 Hz/10 MHz to 67 GHz
Category:
Network analyzer
Desktop network analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N5227B PNA Microwave Network Analyzer, 900 Hz/10 MHz to 67 GHz
- Brand: Keysight Technologies
N5227B Vector Network Analyzer (Keysight PNA Series)
Core Technical Indicators
- Frequency Coverage ：
- Basic Frequency Range : 10 MHz to 67 GHz ，supports low-frequency extension to 900 Hz (requires optional accessories), covering the full frequency band from audio to high-frequency millimeter waves, suitable for automotive radar (76-81 GHz), satellite communication (Ka band) and other high-frequency applications.
- Supports frequency extension modules (such as higher frequency upgrades), compatible with future technological evolution (such as 100 GHz and above device pre-research).
- Measurement Accuracy and Dynamic Performance ：
- System Dynamic Range : 126 dB (typical value), receiver dynamic range reaches 132 dB ，supports high-precision characterization of weak signals from low-noise devices (such as LNAs), reducing the influence of noise floor on measurement.
- Trace noise as low as 0.003 dB rms (amplitude) 、 0.08° rms (phase) ，ensuring high repeatability of S-parameter measurement, especially suitable for consistency testing of precision devices (such as filters, couplers).
- Power and Linearity ：
- Maximum Output Power +13 dBm ，power scan range 38 dB ，supports linearity/nonlinearity characteristic testing of active devices (such as power compression point, harmonic distortion, intermodulation distortion).
- Harmonic suppression better than -60 dBc ，supports pulse modulation signal testing (requires optional accessories), meeting the transient power characteristic analysis of radar pulse components.
- Speed and Flexibility ：
- 201-point scan time as fast as 5.5 ms (fast scan mode), improving mass production testing efficiency; intermediate frequency bandwidth (IFBW) supports 10 Hz to 15 MHz ，balancing noise and speed requirements.
- Standard 2-port single source ，can be upgraded to 4-port dual source configuration, supporting full-parameter measurement of multi-port networks (such as circulators, duplexers), compatible with amplitude-phase consistency calibration of 3D antenna arrays.
- Calibration and Interface ：
- Built-in bias-tee and programmable attenuator, simplifying bias power supply and power adjustment for active devices; supports one-button fully automatic calibration with electronic calibration kit (ECal) (completed within 15 seconds), reducing manual calibration errors.
Functional Characteristics
- Full Parameter Measurement Capability ：
- Basic Functions ：4-port S-parameters (including 12 error corrections), impedance/admittance, VSWR, group delay, stability factor, etc., supporting real-time display of complex data formats (amplitude/phase, real part/imaginary part).
- Advanced Analysis ：
- Nonlinear Characterization ：Supports third-order intermodulation distortion (IMD3), harmonic output power (up to 3rd/5th harmonic), AM/AM and AM/PM conversion measurement, suitable for nonlinear modeling of power amplifiers and mixers and pre-distortion algorithm optimization.
- Differential Mode ：Supports common-mode/differential-mode characteristic testing of balanced devices (such as differential filters, balanced amplifiers), meeting the signal integrity analysis of high-speed digital interfaces (such as PCIe, SerDes).
- Integrated Noise Figure Measurement ：Built-in noise source interface, directly measuring device noise figure and associated gain, eliminating the need for an external independent noise figure analyzer, simplifying multi-instrument collaborative testing process.
- Time Domain and Material Analysis Tools ：
- Time Domain Analysis ：Fault location is achieved through inverse Fourier transform (IFT) (such as cable loss, connector discontinuity), with a resolution of 1 mm (electrical length) ，supports pulse response testing and transient signal characteristic evaluation.
- Material Characterization Using coaxial probes, waveguide fixtures, or free-space testing devices, it measures the dielectric constant (εr), permeability (μr), and loss tangent (tanδ) of dielectric materials. It supports PLTS software for dielectric parameter fitting and meets the loss analysis requirements of high-frequency board materials (such as Rogers, FR4).
- Intelligent Operation and System Integration ：
- Human-Machine Interaction A 12.1-inch color touch screen supporting gesture zoom/drag, real-time display of Smith charts, polar plots, time-domain waveforms, and other multi-format curves, supports multi-window comparative analysis, and data can be exported with one click as CSV, PDF, or images.
- Expansion Interfaces Equipped with USB 3.0, LAN (LXI), GPIB interfaces, compatible with LabVIEW, MATLAB, and Keysight Technologies PathWave automation software, supporting multi-instrument synchronous triggering (such as with signal sources and power meters), facilitating the construction of automated testing systems.
Typical Application Scenarios
- Automotive Radar and Intelligent Driving ：
- Testing 76-81 GHz automotive radar front-end modules (such as transceiver chips, microstrip antenna arrays) for return loss, port isolation, and amplitude-phase consistency, ensuring the target detection accuracy and anti-interference capability of the radar sensor.
- Analyze the harmonic suppression and spurious response of the radar transmitter to meet the reliability requirements of radio frequency devices in the ISO 26262 functional safety standard.
- 5G Millimeter Wave and Satellite Communication ：
- Verify the in-band insertion loss, out-of-band suppression, and temperature stability of 5G NR high-frequency bands (such as n260/n261, 37-43.5 GHz) filters, and support phase consistency calibration of large-scale MIMO antenna arrays.
- Test the gain flatness and noise figure of satellite payload components (such as Ka-band low-noise amplifiers, power combiners) to ensure high signal-to-noise ratio transmission of the satellite-ground link.
- Research and Mass Production Testing ：
- Universities and R&D Laboratories Used for high-frequency microwave circuit design (such as finline filters, dielectric resonators), electromagnetic characteristic characterization of new materials (such as metamaterials, graphene devices), supporting custom algorithm development and firmware upgrades.
- Industrial Production Lines High-speed scanning mode adapts to high-frequency connectors (such as 2.92 mm, 1.85 mm connectors), and chip devices for batch screening. Built-in statistical functions monitor the yield rate in real time and generate compliant test reports (such as those compliant with CE, FCC standards).
Summary of Advantages
-
Number N5227B-200 2 ports, basic hardware configuration Number N5227B-201 2 ports, with configurable test set, reference mixer switch Number N5227B-205 2 ports, with configurable test set, reference mixer switch, bias tee, low-frequency extension Number N5227B-210 2 ports, with calibrated configuration Number N5227B-219 2 ports, with configurable test set, reference mixer switch, source and receiver attenuators, bias tee Number N5227B-220 2 ports, with configurable test set, reference mixer switch, source and receiver attenuators, bias, low-frequency extension Number N5227B-405 4 ports, with second source, configurable test set, reference mixer switch, bias tee, low-frequency extension Number N5227B-420 4 ports, with second source, configurable test set, reference mixer switch, source and receiver attenuators, bias, low-frequency extension Number N5227B-400 4 ports, with second source Number N5227B-401 4 ports, with second source, configurable test set, reference mixer switch Number N5227B-410 4 ports, with second source, calibrated configuration Number N5227B-419 4 ports, with second source, configurable test set, reference mixer switch, source and receiver attenuators, bias tee Calibration documentation
Number N5227B-1A7 Calibration + Uncertainty + Guard Band (Unaccredited) Number N5227B-A6J ANSI Z540-1-1994 Calibration Number N5227B-UK6 Commercial Calibration Certificate with test data Other hardware features
Number N5227B-021 Add pulse modulator to internal source 1 Number N5227B-022 Add pulse modulator to internal source 2 Number N5227B-020 Add IF input N5227B-UNY Enhanced low phase noise performance Software with Subscription
S93007B Automatic Fixture Removal S93010B Time Domain Analysis S93011B Enhanced Time Domain Analysis using TDR S93015B Real-time S-parameter and power measurement uncertainty S93025B Basic pulsed RF measurements S93026B Advanced pulsed RF measurements S93029B Noise figure measurements with vector correction S93080B Frequency offset measurements S93082B Scalar mixer/converter measurements S93083B Vector and scalar mixer/converter measurements S93084B Embedded-LO functionality S93086B Gain compression measurements S93087B Intermodulation distortion measurements S93088B Source phase control S93089B Differential and I/Q device measurements S930900B Spectrum analysis up to 8.5 GHz S930901B Spectrum analysis up to 13.5 GHz S930902B Spectrum analysis up to 26.5 GHz S930904B Spectrum analysis up to 43.5 GHz S930905B Spectrum analysis up to 50 GHz S930907B Spectrum analysis up to 70 GHz S930909B Spectrum analysis up to 90 GHz S93093B Spectrum analysis up to 125 GHz S93094B Spectrum analysis up to 125 GHz and above S93118B Fast CW measurements S93460B True-mode stimulus S93551B N-port measurements S93898B Built-in performance test software S930317B Phase noise measurements up to 70 GHz S930321B Phase noise measurements up to 125 GHz S93051B IQ data bandwidth up to 4 GHz S930709B Modulation distortion up to 90 GHz S930712B Modulation distortion up to 125 GHz S930700B Modulation distortion up to 8.5 GHz S930713B Modulation distortion up to 125 GHz and above S930701B Modulation distortion up to 13.5 GHz S930702B Modulation distortion up to 26.5 GHz S930704B Modulation distortion up to 43.5 GHz S93072B Internal 6 GHz arbitrary waveform generation S930705B Modulation distortion up to 50 GHz S930707B Modulation distortion up to 70 GHz S94601B Device Measurement eXpert - DMX S94602B Limit Assistant Auxiliary materials
U8488A Power sensor; USB average thermocouple, 10MHz-67GHz Part Number N5227B-1CM Rack mount kit for handleless installation Part Number N5227B-1CP Rack mount kit for installation with handle Part Number N1966A Pulse/IO adapter Part Number N6171A MATLAB software N5227B-Solid State Drive Additional removable solid-state drive
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!
Contact Information
Add.: 2nd Floor, Building C, Zhongzhi Zhichuang Park, Yucui Community, Longhua Street, Longhua District, Shenzhen City, Guangdong Province, China
Tel: +86-135 1042 6680
Email: harriosn@sengt.com
Follow us
Follow us