N9915A FieldFox Handheld Microwave Analyzer, 9 GHz
N9915A FieldFox Handheld Microwave Analyzer, 9 GHzKey Specifications ParameterSpecificationMaximum Frequency9 GHzCAT/VNA Start Frequency30 kHzSpectrum Analyzer Start Frequency5 kHzBuilt-in Ports2 portsDANL @ 1 GHz-155 dBmOverall Amplitude Accuracy±0.35 dBPhase Noise @ 1 GHz (10 kHz offset)-111 dBc/HzSystem Dynamic Range100 dBTOI @ 1 GHz+15 dBmTrace Noise0.004 dB rmsWeight3.0 kg (6.6 lb)Key Features: Standard cable and antenna analyzer; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more via software options. Simultaneous measurement of all four S-parameters. DTF and TDR measurement in a single sweep. QuickCal calibration without external calibration kits. No warm-up required for spectrum analyzer measurements .Primary Use CasesCable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-port cable loss measurement allows testing when only one end of the cable is accessible .RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, mixers, and attenuators. Built-in DC source enables biasing active devices during measurement .Field Spectrum Monitoring and Interference Analysis: Spectrum analysis from 5 kHz to 9 GHz with ±0.5 dB accuracy. Optional real-time spectrum analysis (RTSA) for capturing intermittent signals, and spectrogram for interference identification .Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station signal verification and network optimization .Harsh Environment Field Work: MIL-PRF-28800F Class 2 compliant, IP53 rated, operating temperature -10°C to +55°C. Designed for routine maintenance and in-depth troubleshooting in the field .
Category:
Spectrum analyzer
Handheld spectrum analyzer
Product Attachment:
- Product Description
- Selection
-
- Brand: 是德科技
- Commodity name: N9915A FieldFox Handheld Microwave Analyzer, 9 GHz
- Brand: Keysight Technologies
N9915A FieldFox Handheld Microwave Analyzer, 9 GHzKey Specifications ParameterSpecificationMaximum Frequency9 GHzCAT/VNA Start Frequency30 kHzSpectrum Analyzer Start Frequency5 kHzBuilt-in Ports2 portsDANL @ 1 GHz-155 dBmOverall Amplitude Accuracy±0.35 dBPhase Noise @ 1 GHz (10 kHz offset)-111 dBc/HzSystem Dynamic Range100 dBTOI @ 1 GHz+15 dBmTrace Noise0.004 dB rmsWeight3.0 kg (6.6 lb)Key Features: Standard cable and antenna analyzer; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more via software options. Simultaneous measurement of all four S-parameters. DTF and TDR measurement in a single sweep. QuickCal calibration without external calibration kits. No warm-up required for spectrum analyzer measurements .Primary Use CasesCable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-port cable loss measurement allows testing when only one end of the cable is accessible .RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, mixers, and attenuators. Built-in DC source enables biasing active devices during measurement .Field Spectrum Monitoring and Interference Analysis: Spectrum analysis from 5 kHz to 9 GHz with ±0.5 dB accuracy. Optional real-time spectrum analysis (RTSA) for capturing intermittent signals, and spectrogram for interference identification .Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station signal verification and network optimization .Harsh Environment Field Work: MIL-PRF-28800F Class 2 compliant, IP53 rated, operating temperature -10°C to +55°C. Designed for routine maintenance and in-depth troubleshooting in the field .
N9915A FieldFox Handheld Microwave Analyzer, 9 GHz
Key Specifications
Parameter Specification Maximum Frequency 9 GHz CAT/VNA Start Frequency 30 kHz Spectrum Analyzer Start Frequency 5 kHz Built-in Ports 2 ports DANL @ 1 GHz -155 dBm Overall Amplitude Accuracy ±0.35 dB Phase Noise @ 1 GHz (10 kHz offset) -111 dBc/Hz System Dynamic Range 100 dB TOI @ 1 GHz +15 dBm Trace Noise 0.004 dB rms Weight 3.0 kg (6.6 lb) Key Features: Standard cable and antenna analyzer; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more via software options. Simultaneous measurement of all four S-parameters. DTF and TDR measurement in a single sweep. QuickCal calibration without external calibration kits. No warm-up required for spectrum analyzer measurements .
Primary Use Cases
Cable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-port cable loss measurement allows testing when only one end of the cable is accessible .
RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, mixers, and attenuators. Built-in DC source enables biasing active devices during measurement .
Field Spectrum Monitoring and Interference Analysis: Spectrum analysis from 5 kHz to 9 GHz with ±0.5 dB accuracy. Optional real-time spectrum analysis (RTSA) for capturing intermittent signals, and spectrogram for interference identification .
Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station signal verification and network optimization .
Harsh Environment Field Work: MIL-PRF-28800F Class 2 compliant, IP53 rated, operating temperature -10°C to +55°C. Designed for routine maintenance and in-depth troubleshooting in the field .
Product Consultation
Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!


