All
  • All
  • Product Management
  • News
%{tishi_zhanwei}%
Product Center
+
  • 下载 (1)(1795070466251).png
  • 下载 (2)(1795070466239).png
  • 下载 (3)(1795070466237).png
  • 下载 (4)(1795070466339).png
  • 下载(1795070466240).png

The 14 GHz FieldFox-class handheld combination analyzer corresponds to the N9916A/B/D series (depending on generation)

The 14 GHz FieldFox-class handheld combination analyzer corresponds to the N9916A/B/D series (depending on generation). Since the specific model suffix was not specified, the core parameters below are based on the N9916A (the model matching your previous N9914A/N9915A generation), with differences for the B/D series noted where applicable.Key Specifications (N9916A)  ParameterSpecificationMaximum Frequency14 GHzMaximum Analysis Bandwidth10 MHzMaximum IQ Streaming Bandwidth1 MHzVNA CapabilityOptionalSpectrum Analyzer Accuracy±0.5 dB (no warm-up required)Weight3.0 kg (6.6 lb)Standard ConfigurationCable and Antenna Analyzer (CAT)Key Features: Standard CAT; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter via options. Simultaneous measurement of all four S-parameters. Single-sweep DTF and TDR measurement. QuickCal calibration without external kits .Note: The newer N9916B offers 120 MHz analysis bandwidth, 115 dB dynamic range, ±0.3 dB spectrum accuracy, and weighs 3.4 kg . The N9916D further improves to 120 MHz IQ streaming bandwidth, ±0.1 dB spectrum accuracy, and 3.6 kg .Primary Use CasesCable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-sweep DTF/TDR saves field time .RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, and other components. Simultaneous four S-parameter measurement accelerates verification .Field Spectrum Monitoring and Interference Analysis: Spectrum analysis up to 14 GHz with benchtop-level accuracy without warm-up. Spectrogram and AM/FM tune-and-listen assist in interference identification .Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station verification and network optimization .Harsh Environment Field Work: Designed for routine maintenance and in-depth troubleshooting in challenging environments. (MIL-PRF-28800F Class 2 and IP53 ratings are specified in FieldFox family documentation .)

Category:

Spectrum analyzer

Handheld spectrum analyzer


  • Product Description
  • Selection
    • Brand: 是德科技
    • Commodity name: The 14 GHz FieldFox-class handheld combination analyzer corresponds to the N9916A/B/D series (depending on generation)
    • Brand: Keysight Technologies

    The 14 GHz FieldFox-class handheld combination analyzer corresponds to the N9916A/B/D series (depending on generation). Since the specific model suffix was not specified, the core parameters below are based on the N9916A (the model matching your previous N9914A/N9915A generation), with differences for the B/D series noted where applicable.Key Specifications (N9916A)  ParameterSpecificationMaximum Frequency14 GHzMaximum Analysis Bandwidth10 MHzMaximum IQ Streaming Bandwidth1 MHzVNA CapabilityOptionalSpectrum Analyzer Accuracy±0.5 dB (no warm-up required)Weight3.0 kg (6.6 lb)Standard ConfigurationCable and Antenna Analyzer (CAT)Key Features: Standard CAT; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter via options. Simultaneous measurement of all four S-parameters. Single-sweep DTF and TDR measurement. QuickCal calibration without external kits .Note: The newer N9916B offers 120 MHz analysis bandwidth, 115 dB dynamic range, ±0.3 dB spectrum accuracy, and weighs 3.4 kg . The N9916D further improves to 120 MHz IQ streaming bandwidth, ±0.1 dB spectrum accuracy, and 3.6 kg .Primary Use CasesCable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-sweep DTF/TDR saves field time .RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, and other components. Simultaneous four S-parameter measurement accelerates verification .Field Spectrum Monitoring and Interference Analysis: Spectrum analysis up to 14 GHz with benchtop-level accuracy without warm-up. Spectrogram and AM/FM tune-and-listen assist in interference identification .Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station verification and network optimization .Harsh Environment Field Work: Designed for routine maintenance and in-depth troubleshooting in challenging environments. (MIL-PRF-28800F Class 2 and IP53 ratings are specified in FieldFox family documentation .)

    The 14 GHz FieldFox-class handheld combination analyzer corresponds to the N9916A/B/D series (depending on generation). Since the specific model suffix was not specified, the core parameters below are based on the N9916A (the model matching your previous N9914A/N9915A generation), with differences for the B/D series noted where applicable.

    Key Specifications (N9916A)

     
     
    ParameterSpecification
    Maximum Frequency14 GHz
    Maximum Analysis Bandwidth10 MHz
    Maximum IQ Streaming Bandwidth1 MHz
    VNA CapabilityOptional
    Spectrum Analyzer Accuracy±0.5 dB (no warm-up required)
    Weight3.0 kg (6.6 lb)
    Standard ConfigurationCable and Antenna Analyzer (CAT)

    Key Features: Standard CAT; expandable with VNA, spectrum analyzer, built-in power meter, vector voltmeter via options. Simultaneous measurement of all four S-parameters. Single-sweep DTF and TDR measurement. QuickCal calibration without external kits .

    Note: The newer N9916B offers 120 MHz analysis bandwidth, 115 dB dynamic range, ±0.3 dB spectrum accuracy, and weighs 3.4 kg . The N9916D further improves to 120 MHz IQ streaming bandwidth, ±0.1 dB spectrum accuracy, and 3.6 kg .

    Primary Use Cases

    Cable and Antenna System Maintenance: Return loss, VSWR, cable loss, and distance-to-fault (DTF) measurements for base station feeders and antenna systems. Single-sweep DTF/TDR saves field time .

    RF/Microwave Component Testing: S-parameter characterization of filters, amplifiers, and other components. Simultaneous four S-parameter measurement accelerates verification .

    Field Spectrum Monitoring and Interference Analysis: Spectrum analysis up to 14 GHz with benchtop-level accuracy without warm-up. Spectrogram and AM/FM tune-and-listen assist in interference identification .

    Over-the-Air (OTA) Signal Analysis: Optional LTE FDD and 5GTF OTA measurements for base station verification and network optimization .

    Harsh Environment Field Work: Designed for routine maintenance and in-depth troubleshooting in challenging environments. (MIL-PRF-28800F Class 2 and IP53 ratings are specified in FieldFox family documentation .)

Product Consultation

Please fill out the form below, leave your contact information and needs, and we will be happy to serve you!

*
*
Submit Message